Lifting Solutions for Drainage Systems | Water, Sewer & Pipe

Part Description Ex: 36-2.4 Model (36) - Capacity (2.4 Ton) -Lightweight non-conductive design is 70% lighter than other beams -Handles batteries of equal length -Acid-resistant, coated polyester straps and hooks -Standard sling length is 10 inches

C-3 Pipe Grab

Part Description Ex: FB-30 Model (FB) - Capacity (3,000 Lbs) -Telescoping boom with maximum horizontal reach of 12' -Makes any fork lift more versatile for lifting loads -Adjustable Hook positions & restraining chain standard -Handle at boom end for easy extension

Part Description Ex: FE-60 Model (FE) - Extension Length (60 Inches) -Easy installation onto existing fork for oversized loads -Fits standard fork thickness -Standard fork extension widths 4" - 7" -Standard fork extension lengths 42" - 96"

Part Description Ex: 36E-2.4 Model (36) - Capacity (2.4 Ton) -Lightweight non-conductive design is 70% lighter than other beams -Handles batteries of different lengths -Acid-resistant, coated polyester straps and hooks -Standard sling length is 10 inchesUsed for applications that require a non-conductive beam such as lifting industrial forklift truck batteries.

Part Description Ex: MFL-12-4 Model(MFL) (42 In) - Pipe Size (12 In) - Arm Qty (4) -Heavy duty design can pick up 4, 5 or 6 pipes at one time -Designed for moving & loading concrete pipe -Rubber bumpers help protect pipe from damage -Pocket design is open for easy cleaning & moisture drainage -Restraining chain with grab hook is standard

Part Description Ex: MPP-1 Model (MPP) - Min Opening (1 Inch) -Used for moving hard to reach loaded pallet from flat surfaces -Extends reaching capability of fork truck -Single scissor action with 3/8" proof coil chain standard -WLL is 1,250 lbs. NOT for overhead lifting

Part Description Ex: PB-30 Model (PB) - Capacity (3,000 Lbs) -Adjustable vertically in five increments up to maximum 45 degree angle -Telescoping boom with maximum horizontal reach of 12' -Makes any fork lift more versatile for lifting loads -Adjustable Hook positions & restraining chain standard -Handle at boom end for easy extensionThe Pivot Boom Model has a telescoping boom with a maximum horizontal reach of 12 feet. The boom also vertically pivots to a height of 6'4". Choose from 3000-, 4000-, 6000-, or 8000-lb capabilities. The versatile unit adjusts vertically in five increments up to 40 degrees.

Steel Pipe Grab

Part Description Ex: SPTR-8 Model(SPTR) - Max Gross Trailer Weight (2000 - 6000 lbs) -Inexpensive way to move trailers with your fork truck -Quickly attaches to both forks for stable load movement with safety chain & hook for added security -Accepts standard 2" hitch inserts designed to handle 1-7/8" to 2-5/16" ball -Up to 6,000 pounds gross towing weight with pintle adapter

Part Description Ex: 36L-3.5 Model (36) - Capacity (3.5 Ton) -Lightweight non-conductive low headroom beam 18.23" -Adjustable to handle batteries of different lengths -Acid-resistant, coated polyester straps and hooks -Standard sling length is 10 inchesAll the great features of the Model 36 and 36E, but in a lower headroom design. Non-conductive for safe lifting of industrial fork truck batteries.

Part Description Ex: EB-15 Model (EB) - Capacity (1,500 Lbs) -Economical fixed boom attachment when telescoping is NOT required -Makes any fork lift more versatile for lifting loads -Model 15 is lightweight and fixed hook positions -Model 40 has 5 alternate hook positions -Restraining chain with grab hook standard

Part Description Ex: PB-60-PLB Model (PLB) - Capacity (3,000 Lbs) -Adjustable vertically in five increments up to maximum 45 degree angle -Telescoping boom with maximum horizontal reach of 12' -Makes any fork lift more versatile for lifting loads -Adjustable Hook positions & restraining chain standard -Handle at boom end for easy extensionQuickly turns your fork lift into a portable crane.

Part Description Ex: ROB-40 Model (ROB) - Capacity (4,00 Lbs) -Specifically used where extra boom extension or clearance is required -Telescoping boom with multiple hook positions -Swivel hooks with latches standard -Restraining chain with grab hook standardUse the Reach-Over Boom when an extension boom is required and clearance is a factor.

With the Model BFC Beam Flange Clamps, you get options. First, select from five capacity choices, then decide if you need a large bail. You'll also be able to hang hoists or rig from overhead and handle even bigger loads by using the clamp in pairs with a beam.

Part Description Ex: FCJ-40 Model (FCJ) - Capacity (4,00 Lbs) -Specifically used when fork obstruction is undesirable -Horizontal 15 degree adjustments of center pivot boom -Designed for ITA Class II fork carriages -Multiple hook positions -Swivel hooks with latches standard

Part Description Ex: 10-2-20 Model (10) - Capacity (2 ton) - Beam Length (20 In) -Easy attachment with no special tools needed -All welded construction -Makes any fork lift more versatile for lifting loads -Fixed and swivel hook options available

Single Swivel Hook Beam

Part Description Ex: 15-2-20 Model (15) - Capacity (2 ton) - Beam Length (20 In) -Easy attachment with no special tools needed -All welded construction -Makes any fork lift more versatile for lifting loads -Fixed and swivel hook options available

Can't find exactly what you need? Click here to customize! Model 16

Model 17 Adjustable Lifting Beam features an adjustable bail and lifting points in 6" increments to handle standard and unbalanced loads. Get the set-up you need with a few quick motions.

Fixed Twin Basket Sling Lifting Beam, Economy

Fixed-Spread Lifting Beam, Economy

Low-Headroom Multiple-Spread Lifting Beam

Low-Headroom Multiple-Spread Lifting Beam

High-Capacity Lifting Beams

Bell Style Triangle Lifting Beam

Shackle Style Triangle Lifting Beam

Twin Hoist Rotating Lifting Beam

Heavy-Duty Twin Basket Sling Lifting Beams

Center of gravity should be evaluated, unbalanced loads can create unstable rigging; consult qualified rigger or factory

Twin Hoist Lifting Beam

Center of gravity should be evaluated, unbalanced loads can create unstable rigging; consult qualified rigger or factory

Center of gravity should be evaluated, unbalanced loads can create unstable rigging; consult qualified rigger or factory

Center of gravity should be evaluated, unbalanced loads can create unstable rigging; consult qualified rigger or factory

Standard Adjustable 4-Point Lifting Beam

Bulk Container Lifting Beam

Center of gravity should be evaluated, unbalanced loads can create unstable rigging; consult qualified rigger or factory

Chlorine Cylinder Lifting Beam

Fixed Spreader Beam

High-Capacity Spreader Beam

Adjustable Spreader Beam

4-Point Spreader Beam

Custom Spreader Systems

Part Description Ex: 5-1 1/2-4 Model (5) - Capacity (1.5 ton) - Tube Opening (4-1/2 In) -Easy attachment with no special tools needed -All welded construction -Makes any fork lift more versatile for lifting loads -Fixed and swivel hook options available

Single Swivel Fork Hook

Bale Lifting Tongs

Aluminum Chokers

Adjustable Lifting Grab

Beam Clamp

Spreader Beam End Fittings

Beam End Fittings for 4-Point Spreader Beam

Beam End Fitting - Pipe Coupler

Barrel/Drum Hooks

Barrier Grabs

Multiple lifting angles? No problem. The Model BWC beam web clamp is ready to handle an I-beam. During side- or top-load applications, the clamp grips the beam's web while pinching the flange at the same time for positive contact while you are lifting or suspending.

Turn your loader into a forklift. Easy to attach, simply place the lip of the bucket in the slot, tighten the bolt, and lift— there is nothing to weld! Sturdy, flame-cut handles make installation and removal fast and easy. The Caldwell Bucket Forks store easily and are very cost-effective.

Leveling Pipe Lifter

The patented concrete Pipe Pick™ is a quicker, safer, and cleaner way of handling precast concrete pipe.

Dual Custom Gripping Tongs

Part Description Ex: DLT-1-20 Model (DLT) - Capacity (1 Ton) - Max Span (20 in) -Broad capacity range -Low headroom design -Engineered to strict ASME Standards

2-Point 110-Metric Ton Spreader Beam System

Distributor Benefits Keep components in stock to give your customers quick-ship access to a variety of certified spreaders ... or offer as configurable rental inventoryOffer additional components (spreader sections or end/corner fittings) after initial beam system sale to help your customers expand their capabilities without breaking the bank

Distributor Benefits Keep components in stock to give your customers quick-ship access to a variety of certified spreaders ... or offer as configurable rental inventoryOffer additional components (spreader sections or end/corner fittings) after initial beam system sale to help your customers expand their capabilities without breaking the bank

Distributor Benefits Keep components in stock to give your customers quick-ship access to a variety of certified spreaders ... or offer as configurable rental inventoryOffer additional components (spreader sections or end/corner fittings) after initial beam system sale to help your customers expand their capabilities without breaking the bank

Distributor Benefits Keep components in stock to give your customers quick-ship access to a variety of certified spreaders ... or offer as configurable rental inventoryOffer additional components (spreader sections or end/corner fittings) after initial beam system sale to help your customers expand their capabilities without breaking the bank

Distributor Benefits Keep components in stock to give your customers quick-ship access to a variety of certified spreaders ... or offer as configurable rental inventoryOffer additional components (spreader sections or end/corner fittings) after initial beam system sale to help your customers expand their capabilities without breaking the bank

Distributor Benefits Keep components in stock to give your customers quick-ship access to a variety of certified spreaders ... or offer as configurable rental inventoryOffer additional components (spreader sections or end/corner fittings) after initial beam system sale to help your customers expand their capabilities without breaking the bank

Distributor Benefits Keep components in stock to give your customers quick-ship access to a variety of certified spreaders ... or offer as configurable rental inventoryOffer additional components (spreader sections or end/corner fittings) after initial beam system sale to help your customers expand their capabilities without breaking the bank

Get extra reach! Specifically for use with off-road fork trucks. Low-profile design saves storage space.

Beam Grabs - Extended Capacity

Part Description Ex: FDD-10-55 Model(FDD) - Capacity (1000 lbs) - Drum Type (55) - Heavy duty design handles all standard 55 gallon metal drums - Drum is secured to the lifter by a load binder - Designed to lift, travel and dump drums into acceptable type containers - Pressure applied to the drum base against rim of container - Tilts drum to preferred angle to empty contents

Part Description Ex: FDL-20-55 Model(FDL) - Capacity (2000 lbs) - Drum Type (55) - Heavy duty design handles all standard 55 gallon metal drums - Use where an overhead hoist is not available - Drum is secured to the carrier above fork level & can be used at full height of fork truck - With the chain wheel (10'), operator may rotate the drum from the seat

Double Steel Drum Grippers

Single Steel Drum Grippers

Choose from three lifting capacities: 15, 20, or 25 tons. For lifting and positioning structural beams. Can be used in pairs in conjunction with a spreader beam for additional stability. For vertical lifting only.

G-Link™ Coupler

High-Capacity Beam End Fittings

"Corky" Container Lifting Lug

A great choice for municipalities, water departments, street crews, and more. Choose 2- or 3- leg option. Clamp is sold separately.

Safe, efficient, and easy to use. Fully adjustable legs help you balance the load quickly.

Part Description Ex: MML-26-S Model (MML) - Diameter (up to 26") - Material S or A (Steel or Aluminum) -Move manhole covers or grates with one operator -Handle extends for additional leverage and breaks down for easy storage -Ergonomically designed 4-position latch hook and three handle angle positionMoving heavy manhole covers becomes a one-person operation, reducing the potential for injury on the

"Tea Cup" Pipe Carrier

Low Profile "Tea Cup" Pipe Carrier

Simplicity personified! Just attach a shackle to the lifting point, slide the "mouth" over the end of the pipe, and you're ready to lift.

Pipe Tongs - Adjustable

Web Sling Quick Disconnects

Reel Lifter

Unilink Combination Triangle/Choker

Web-Trap? Steel Triangles & Chokers

Weld On Bucket Hook