Horizontal Lifting Clamps

Model DWS is a horizontal lifting clamp utilizing Renfroe’s famous “lock-closed” feature. This clamp comes in three sizes: 1/2 Ton, 1-1/2 Ton, and 3 Ton.

The Model HRS is a horizontal lifting clamp that has a spring loaded open and closed position. The spring closed position allows one-man operation of multiple clamps. The clamps stay in position where they are attached until spring open is actuated. These clamps must be used in pairs, sets of pairs, or in a tripod arrangement for transporting plates horizontally.

The Model LHC is a horizontal lifting clamp intended to be used in pairs, sets of pairs or in a tripod arrangement for transporting steel plates horizontally. The clamp is designed to lift individual sheets horizontally. Cam operations ensure a tight grip on the load. Serrated gripping cam bites into load for positive grip. Clamps rest in position on edge of plate until tension is applied to the load sling. Clamps must be used in single pairs (2), double pairs (4), or tripod (3) configuration with a lifting sling.

Part Description Ex: LHD-01.50-A Model (LHD) - Clamp Capacity (1.5 Ton) - Grip Range (0 - 2") -Dual serrated gripping cam assemblies for increased surface contact -Non-Locking clamp requires constant tension applied to the lifting shackle throughout operation -Must be used in pairs, sets of pairs or tripod arrangement

The Model WHSR is an adjustable, horizontal clamp intended to be used in pairs, sets of pairs, or in a tripod arrangement for transporting steel plates horizontally. In addition to incorporating two gripping cams, the jaw opening may be adjusted by the positioning of a pin in the body of the clamp. The gripping cams are spring loaded to remain in the "open" position until the load is applied. This feature permits the clamp to be easily applied and removed from the load. Normally furnished with serrated gripping surfaces, it is available with smooth faced bronze or stainless steel surfaces to prevent marring when handling polished plates.