Industrial Building

Part Description Ex: 36-2.4 Model (36) - Capacity (2.4 Ton) -Lightweight non-conductive design is 70% lighter than other beams -Handles batteries of equal length -Acid-resistant, coated polyester straps and hooks -Standard sling length is 10 inches

C-3 Pipe Grab

Part Description Ex: FB-30 Model (FB) - Capacity (3,000 Lbs) -Telescoping boom with maximum horizontal reach of 12' -Makes any fork lift more versatile for lifting loads -Adjustable Hook positions & restraining chain standard -Handle at boom end for easy extension

Part Description Ex: FE-60 Model (FE) - Extension Length (60 Inches) -Easy installation onto existing fork for oversized loads -Fits standard fork thickness -Standard fork extension widths 4" - 7" -Standard fork extension lengths 42" - 96"

Wall Pick

Part Description Ex: 36E-2.4 Model (36) - Capacity (2.4 Ton) -Lightweight non-conductive design is 70% lighter than other beams -Handles batteries of different lengths -Acid-resistant, coated polyester straps and hooks -Standard sling length is 10 inchesUsed for applications that require a non-conductive beam such as lifting industrial forklift truck batteries.

Part Description Ex: MFL-12-4 Model(MFL) (42 In) - Pipe Size (12 In) - Arm Qty (4) -Heavy duty design can pick up 4, 5 or 6 pipes at one time -Designed for moving & loading concrete pipe -Rubber bumpers help protect pipe from damage -Pocket design is open for easy cleaning & moisture drainage -Restraining chain with grab hook is standard

Part Description Ex: MPP-1 Model (MPP) - Min Opening (1 Inch) -Used for moving hard to reach loaded pallet from flat surfaces -Extends reaching capability of fork truck -Single scissor action with 3/8" proof coil chain standard -WLL is 1,250 lbs. NOT for overhead lifting

Part Description Ex: PB-30 Model (PB) - Capacity (3,000 Lbs) -Adjustable vertically in five increments up to maximum 45 degree angle -Telescoping boom with maximum horizontal reach of 12' -Makes any fork lift more versatile for lifting loads -Adjustable Hook positions & restraining chain standard -Handle at boom end for easy extensionThe Pivot Boom Model has a telescoping boom with a maximum horizontal reach of 12 feet. The boom also vertically pivots to a height of 6'4". Choose from 3000-, 4000-, 6000-, or 8000-lb capabilities. The versatile unit adjusts vertically in five increments up to 40 degrees.

Steel Pipe Grab

Part Description Ex: SPTR-8 Model(SPTR) - Max Gross Trailer Weight (2000 - 6000 lbs) -Inexpensive way to move trailers with your fork truck -Quickly attaches to both forks for stable load movement with safety chain & hook for added security -Accepts standard 2" hitch inserts designed to handle 1-7/8" to 2-5/16" ball -Up to 6,000 pounds gross towing weight with pintle adapter

Part Description Ex: 36L-3.5 Model (36) - Capacity (3.5 Ton) -Lightweight non-conductive low headroom beam 18.23" -Adjustable to handle batteries of different lengths -Acid-resistant, coated polyester straps and hooks -Standard sling length is 10 inchesAll the great features of the Model 36 and 36E, but in a lower headroom design. Non-conductive for safe lifting of industrial fork truck batteries.

Part Description Ex: EB-15 Model (EB) - Capacity (1,500 Lbs) -Economical fixed boom attachment when telescoping is NOT required -Makes any fork lift more versatile for lifting loads -Model 15 is lightweight and fixed hook positions -Model 40 has 5 alternate hook positions -Restraining chain with grab hook standard

Part Description Ex: PB-60-PLB Model (PLB) - Capacity (3,000 Lbs) -Adjustable vertically in five increments up to maximum 45 degree angle -Telescoping boom with maximum horizontal reach of 12' -Makes any fork lift more versatile for lifting loads -Adjustable Hook positions & restraining chain standard -Handle at boom end for easy extensionQuickly turns your fork lift into a portable crane.

Part Description Ex: ROB-40 Model (ROB) - Capacity (4,00 Lbs) -Specifically used where extra boom extension or clearance is required -Telescoping boom with multiple hook positions -Swivel hooks with latches standard -Restraining chain with grab hook standardUse the Reach-Over Boom when an extension boom is required and clearance is a factor.

Part Description Ex: FCJ-40 Model (FCJ) - Capacity (4,00 Lbs) -Specifically used when fork obstruction is undesirable -Horizontal 15 degree adjustments of center pivot boom -Designed for ITA Class II fork carriages -Multiple hook positions -Swivel hooks with latches standard

Part Description Ex: 10-2-20 Model (10) - Capacity (2 ton) - Beam Length (20 In) -Easy attachment with no special tools needed -All welded construction -Makes any fork lift more versatile for lifting loads -Fixed and swivel hook options available

Single Swivel Hook Beam

Part Description Ex: 15-2-20 Model (15) - Capacity (2 ton) - Beam Length (20 In) -Easy attachment with no special tools needed -All welded construction -Makes any fork lift more versatile for lifting loads -Fixed and swivel hook options available

Can't find exactly what you need? Click here to customize! Model 16

Model 17 Adjustable Lifting Beam features an adjustable bail and lifting points in 6" increments to handle standard and unbalanced loads. Get the set-up you need with a few quick motions.

Fixed Twin Basket Sling Lifting Beam, Economy

Fixed-Spread Lifting Beam, Economy

Low-Headroom Multiple-Spread Lifting Beam

Low-Headroom Multiple-Spread Lifting Beam

High-Capacity Lifting Beams

Bell Style Triangle Lifting Beam

Shackle Style Triangle Lifting Beam

Twin Hoist Rotating Lifting Beam

Heavy-Duty Twin Basket Sling Lifting Beams

Roll Lifting Beams

Roll Lifting Beams

Center of gravity should be evaluated, unbalanced loads can create unstable rigging; consult qualified rigger or factory

Twin Hoist Lifting Beam

Center of gravity should be evaluated, unbalanced loads can create unstable rigging; consult qualified rigger or factory

Center of gravity should be evaluated, unbalanced loads can create unstable rigging; consult qualified rigger or factory

Center of gravity should be evaluated, unbalanced loads can create unstable rigging; consult qualified rigger or factory

Standard Adjustable 4-Point Lifting Beam

Bulk Container Lifting Beam

Center of gravity should be evaluated, unbalanced loads can create unstable rigging; consult qualified rigger or factory

Chlorine Cylinder Lifting Beam

Fixed Spreader Beam

Vertical Drum Clamp Chain Rigging

High-Capacity Spreader Beam

Adjustable Spreader Beam

4-Point Spreader Beam

Custom Spreader Systems

Can't find exactly what you need? Click here to customize! Model 416

Dura-Lite Model 419 is the composite version of Caldwell's Model 19. Choose from 1/4- to 3-ton capacities.

Can't find exactly what you need? Click here to customize! Model 430

Part Description Ex: 5-1 1/2-4 Model (5) - Capacity (1.5 ton) - Tube Opening (4-1/2 In) -Easy attachment with no special tools needed -All welded construction -Makes any fork lift more versatile for lifting loads -Fixed and swivel hook options available

Motorized Rotating Crane Hook Clevis Style

Motorized Rotating Crane Hook Pin Ball

Single Swivel Fork Hook

Heavy-Duty Sheet Lifters

Battery Powered Sheet Lifter

Hydraulic Powered Sheet Lifter

Motorized Heavy-Duty Sheet Lifters

Small Bundle Sheet Lifter

Standard Duty Sheet Lifter

Roll Gripping Tongs

Roll Grabs

Dixon Coil Hook with Pivoting Wedge

Roll Lifting C-Hooks

Heavy-Duty C-Hook

Slit Coil C-Hook

Narrow Coil C-Hook

Close Stacking C-Hook

Ergonomic Vertical Eye Coil Lifter

Extended Width Vertical Eye Coil Lifter

Vertical Eye Coil Grab with Handwheel

Telescoping Coil Lifter with Chainwheel

Motorized Telescoping Coil Grab

Motorized Roll Lifters

Motorized Telescoping Coil Grab with Rotation

Double Leg Coil Lifter

Heavy Duty Coil Upender

Low Platform Coil Upender

Roll Positioners

Pick the capacity, fork length, and bail placement that works for your application. With 16 different configurations in our standard lineup, you're sure to find the one that works for you. Need something different? See the Lightweight and Heavy-Duty models for more options or create a custom design to fit your exact specifications.

Adjustable Load Lifter

O.D. Roll Lifters

Standard Adjustable Forks Pallet Lifter

Hand Wheel Adjustable Forks Pallet Lifter

Wheeled Pallet Lifter

Part Description Ex: 94-2-48 Model (94) - Capacity (2 Ton) - Fork Length (48 in) -Dual lift points eliminates need for counterweight -Lightweight design allows for ease of handling -Maintenance free with no moving parts -Engineered to strict ASME Standards

Heavy-Duty Fixed-Forks Pallet Lifter

Part Description Ex: 96-10-48 Model (96) - Capacity (10 Ton) - Fork Length (48 in) -Double frame design for heavy capacities -Forged forks provides smaller fork size & easy adjustment -Engineered to strict ASME Standards

Part Description Ex: 97-10-48 Model (97) - Capacity (10 Ton) - Fork Length (48 in) -Hand wheel adjustable forks for easy adjustment -Double frame design for heavy capacities -Forged forks provides smaller fork size -Engineered to strict ASME Standards

Single Roll Auto-Leveler

Spreader Beam End Fittings

Beam End Fittings for 4-Point Spreader Beam

Beam End Fitting - Pipe Coupler

Leveling Pipe Lifter

The patented concrete Pipe Pick™ is a quicker, safer, and cleaner way of handling precast concrete pipe.

2-Point 110-Metric Ton Spreader Beam System

Distributor Benefits Keep components in stock to give your customers quick-ship access to a variety of certified spreaders ... or offer as configurable rental inventoryOffer additional components (spreader sections or end/corner fittings) after initial beam system sale to help your customers expand their capabilities without breaking the bank

Distributor Benefits Keep components in stock to give your customers quick-ship access to a variety of certified spreaders ... or offer as configurable rental inventoryOffer additional components (spreader sections or end/corner fittings) after initial beam system sale to help your customers expand their capabilities without breaking the bank